3M™ DI-NOC™ Furniture Film Wood Grain WG-947 Tamo

3M™ DI-NOC™ Furniture Film Wood Grain WG-947 Tamo

Wood Grain, the decorative series for the real wood look

With the self-adhesive films from the 3M™ DI-NOC™ Wood Grain series, you can create an elegant and sophisticated atmosphere in no time at all. The decors are characterized by a natural wood grain, which makes them look like real wood. Like all 3M™ DI-NOC™ furniture foils with a wood look, the Wood Grain series is characterized by universal formability, reliability and enormous durability. Due to the high quality of the surfaces, they create a special aesthetic in newly designed rooms and surfaces.

In our style-conscious world, we are surrounded by fine materials with wonderful surfaces every day. Aesthetics at the highest level is the measure of all things, and 3M DI-NOC decorative films meet precisely this requirement. 3M™ DI-NOC™ surface finishes are available in over 900 design variations and offer quality that can be experienced both visually and haptically. The films have the perfect look and feel of real materials such as marble, wood, leather, carbon or metal. The films can be processed quickly, dust-free and noise-free and are characterized by reliability, durability and universal formability.

As an uncompromising quality product, this lightweight, multi-layered high-tech film defines a new standard in surface design. With excellent technical properties, the 3M™ DI-NOC™ series amazes everyone who comes into contact with it. 3M™ DI-NOC™ is not a printed film, but a specially developed textured film. Most designs are suitable for three-dimensionally deformed surfaces. The film is self-adhesive & is applied without the addition of water. The 3M™ Comply™ adhesive technology enables quick, easy and bubble-free application thanks to air channels in the adhesive. 3M™ DI-NOC™ surface finishes are flexible and lightweight, allowing for more complex surface designs than would be possible with paint or varnish.

The film can be carefully heated with a commercially available hot air dryer (or a hot air gun) (be careful not to overheat!) and thus ensures even greater moldability for strong surface curvatures and 3D bonding. After application, the adhesive strength increases within a few hours. 48 hours after application, the films are firmly bonded to their substrate. Nevertheless, the film can be removed without leaving any residue even years later if applied correctly.

Elegant look for so many purposes

3M™ DI-NOC™ surface finishes allow almost unlimited creative freedom:

• Boat & yacht building, interior & exterior: Scenery design, on-board decors, ship furnishings, etc.
• Optical vehicle tuning: vehicle interior, trim strips, etc.
• Building modernization with general surface & facade refinement
• Car styling: partial wrapping of vehicles of all kinds.
• and many, many more.