3M™ Dichroic Glass Design film DF-PA Blaze Sample

3M™ Dichroic Glass Design film DF-PA Blaze Sample

Experience the color explosion! Now also available as a practical 10cm x 10cm pattern!

3M Dichroic glass design films are available in two variations:

• "Chill" changes colors from translucent cool shades of blue, magenta and yellow to reflective colors of gold and blue.
• "Blaze" alternates between warm shades of cyan, blue and magenta to red and gold.

3M Dichroic glass design film can be applied to all interior glass surfaces and facades. They can be applied quickly and cleanly directly on site. The premium material used in 3M Dichroic glass design films is very durable, easy to clean and can be removed at any time without leaving any residue and without damaging the glass surface. In addition to the incredible color effect, Dichroic glass design film offers increased UV protection, blocking 97% of dangerous UV light and providing unrestricted view to the outside thanks to its high transparency.

Dichroic coated glass has increasingly become a true lifestyle product in modern architecture. What was previously only possible with extremely expensive special glass can now be done much more cost-effectively and easily thanks to 3M Dichroic glass design film. 3M Dichroic glass design film has the property of reflecting color and allowing a second color to shine through. Thus, it even creates different color shades depending on the viewing angle. The color effect created with the 3M Dichroic glass design film is like a real color explosion and turns your windows, showcases, glass cabinets, etc. into a unique, stylish one-of-a-kind with a fascinating rainbow color effect that is visible on both sides of the applied surface. Combining transparency and privacy, 3M Dichroic glass design films are ideal for residential and commercial installations such as homes, office buildings, shopping centers, boutiques or hotels.

Technical Details:
The PVC-free film features a transparent, pressure-sensitive adhesive, making it suitable for application to glass. A hard surface coating increases scratch resistance. 3M Dichroic glass design film features a silicone-coated polyester protective paper. The film is applied wet at an installation temperature of +16 °C to +38 °C. Dichroic Glass Design Film can be applied to all flat interior glass surfaces. The manufacturer explicitly advises against application on all other substrates. Cleaning of the installation is recommended from 30 days after installation. Please note that glass breakage may occur in individual cases on bonded glass surfaces due to thermal expansion. Therefore, always check the local conditions first before application. For further technical details as well as safety instructions, please refer to the attached technical data sheet of the manufacturer.

Important:
Due to production conditions, this product may occasionally show slight cloudiness. This does not represent a defect.