Yellotools WetMaxx Heavy Duty Squeegee System Series

Yellotools WetMaxx Heavy Duty Squeegee System Series

The new WetMaxx squeegee system makes the wet application of window films, tinting films and decorative films easier than ever: The squeegee blade, specially developed for flat glass applications, glides optimally over the film and displaces the adhesive liquid without leaving air pockets. Whether UV protection films on office windows, decorative films on partition walls in the WC area or window tinting films on rear and side windows - the Yellotools WetMaxx is the ideal tool for professional applications in advertising technology and car wrapping!

The squeegee blade is available in two degrees of hardness and three different shapes: The orange version with 90° Shore is perfect for applying to curved vehicle windows, while the white version (95° Shore) is designed for flat glass surfaces such as shop windows and glass facades.

In addition to the rectangular version with a width of 130 mm (only in 90° Shore), we offer two trapezoidal versions with a width of 130 or 160 mm and an edge angle of 15°, each in the two hardness grades 90° and 95° Shore.

Robust construction for easy handling and long durability

Two sturdy aluminum retaining plates hold the WetMaxx squeegee blade securely in the middle, the ergonomic handle is equipped with a non-slip and skin-friendly grip tube. The angle of inclination of the squeegee blade is infinitely adjustable; simply loosen the corresponding screws, adjust the angle and tighten the screws again.

To protect the film from scratches, the lower holding plate is covered with microfiber fabric. This fabric patch is pre-assembled and can also be ordered separately.

Flexibly adaptable for different uses

Depending on the job, the WetMaxx can be quickly converted, for example by replacing the squeegee blade or fitting the additional handle for more contact pressure - a tool with many possibilities that can replace many other bonding tools in your tool bag!

All components of the WetMaxx squeegee system are available individually: From the squeegee blade to the handle to the additional handle, the WetMaxx can be put together individually. As a standard recommendation, we offer the handle in a pair with the various squeegee blades.

The system can also be ordered as an all-in set.

Product features

• Heavy duty squeegee system for wet bonding on glass surfaces
• Two degrees of hardness available: 90° and 95° Shore
• three shape variants: 130 mm rectangle / 130 mm trapezoid / 160 mm trapezoid
• Squeegee blade dimensions (W x L x H): 130 x 50 x 6 mm (S / T / TH 130) or 160 x 50 x 6 mm (T / TH 160)
• Ergonomic, non-slip aluminum handle
• Handle length: 150 mm
• Infinitely adjustable angle of inclination
• Microfiber cover for scratch-free bonding
• Additional handle for more contact pressure when gluing

Notes on configuration

A correspondingly wider clamping plate (SparePlate 160) is required to attach the 160 mm wide squeegee blades. This can also be ordered separately; the standard clamping plate SparePlate 130 is also available separately. When using the additional handle (Grip), the standard screws (Allen short) are replaced with longer ones (Allen long). The screws are supplied with the handle, including a suitable Allen key. Both screw sets can also be ordered separately.